|
Welcome to Tru-Weld - A Division of Tru-Fit Products Corporation
Model TWE-321 Capacitor Discharge Stud Welder
 |
Product Description
The TWE-321 incorporates the latest solid state technology into a compact and rugged capacitor
discharge stud welder. This system has the capability to weld studs and pins (including cupped head pins) ranging from 14 gauge through 5/16"
full-flanged stainless steel studs.
Operational and Safety Features
LED Voltage Meter
Safety Shutdown
Cooling Fan
Front-Panel
Informational LED's
Dial-down weld voltage control
Click Here to view/print the TWE-321 Spec Sheet
Click Here to view/print the TWE-321 Manual |
|
|
TWE-321 Features
- Digital DC Voltage read-out on all models (allows for more accurate and repeatable weld settings).
- Cooling Fan in all models for increased efficiency.
- Dial-down DC voltage settings (no need to turn off the unit when resetting to a lower voltage).
- Only 10 amp circuit requirement (unit fused at 10 amps).
- 99,000 micro farad capacitors charging to 200 VDC for greater power output at lower DC voltage requirements.
- Terminal connections on capacitors are over 5/8" in diameter for a good seat of the terminal buss bars to increase reliability.
- Terminal connections on capacitors have 1/4-20 socket set screws inserted into each one. The socket set
screw is used to make the connection to the buss bars. This eliminates damaging the threads in the aluminum connections of the capacitor,
assuring a solid contact connection.
- Rigid internal construction connecting the the entire internal unit to the front and rear panels minimizes the
opportunity of the components coming loose during handling or operations.
- Sheet metal is powder-coated for greater durability, texture, and appearance.
- CD Stud guns are ergonomically designed for better hand fit and comfort which reduces operator fatigue for increased weld repeatability.
- CD Stud guns have a permanent internal spring with easy adjustment for various spring pressures for applying the correct spring pressure to the weld.
- CD Stud guns can be configured for "B" collets, "CI" collets, Euro collets, or standard tapered chucks.
- The TWE-321 CD Unit weighs less than most other available models for ease of carrying.
|
|
| TWE-321 Specs |
|
| Size |
18-3/4" Length X 8" Width X 9" Height |
| Weight |
29 lbs. |
| Weld Range |
14 gauge through 5/16" stainless |
| Duty Cycle |
30 studs per minute (including 5/16") |
| Primary Power |
110 VAC @ 50/60Hz 10 amp circuit or 220 VAC @ 50/60Hz 5 amp circuit |
| Charge Voltage |
35-200 VDC |
|
|
Made in America
by Tru-Weld Equipment
(330)725-7744 Phone
(330)669-2473 Fax |
*** Product specifications are subject to change without prior notice.
|
All Rights Reserved 2008 - TFP Corporation
Phone 330.725.7741 - Fax: 330.725.0161
460 Lake Rd. Medina, Ohio 44256
Any questions about our site?
Contact the Webmaster
|
weld studs, stud welding, fasteners, welding, ferrules, weld, weld gun, concrete anchor,
decking shear connector, shear connector, arc studs, TT Stud, TP Stud, deformed bar anchor, cd stud, tr stud
collar stud, it stud, weld stud, shoulder stud, stack stud
|
